Network TUIO Receive
Receives touch surfaces and tangible objects data using the TUIO 1.1 protocol (transmitted over OSC). See https://www.tuio.org/ for more info about the protocol.
TUIO trackers (multitouch surfaces, tablets, camera trackers like reacTIVision, etc.) continuously send the state of all alive sessions (fingers, fiducial markers or blobs). This module decodes those messages and exposes them as arrays: each alive session keeps a stable index in all the output arrays as long as it is alive (as long as the finger stays on the surface, for example).
When the module is created, Usine asks for the TUIO profile to decode:
- 2Dcur : cursors (fingers on a touch surface).
- 2Dobj : tangible objects identified by a fiducial marker.
- 2Dblb : untagged blobs.
The outputs of the module depend on the chosen profile.
TUIO devices generally send on the UDP port 3333. Don't forget to add this port to the OSC input ports in the setup panel of Usine.
Settings
address
Osc address of the TUIO profile to decode, /tuio/2Dcur by default.
Change it only if the tracker uses a custom address.
receive
Sends 1 value when a new data is received.
nb cursors
Only for the 2Dcur profile: number of currently alive cursors (fingers on the surface). This is also the size of all the output arrays.
nb objects
Only for the 2Dobj profile: number of currently alive tangible objects. This is also the size of all the output arrays.
nb blobs
Only for the 2Dblb profile: number of currently alive blobs. This is also the size of all the output arrays.
ids
Array of the session id of each alive session. A session id is a unique number attributed by the tracker: a new touch produces a new session id, and the id disappears from the array when the touch is released.
class ids
Only for the 2Dobj profile: array of the fiducial marker id of each alive object. Unlike the session id, the class id identifies which physical object is on the surface.
x
Array of the horizontal positions, in the range [0..1] (0 is the left border of the surface).
y
Array of the vertical positions, in the range [0..1] (0 is the top border of the surface).
angle
Only for the 2Dobj and 2Dblb profiles: array of the rotation angles in radians.
width
Only for the 2Dblb profile: array of the blobs width, normalized.
height
Only for the 2Dblb profile: array of the blobs height, normalized.
area
Only for the 2Dblb profile: array of the blobs area, normalized.
speed x
Array of the horizontal movement speeds.
speed y
Array of the vertical movement speeds.
rotation speed
Only for the 2Dobj and 2Dblb profiles: array of the rotation speeds.
acceleration
Array of the movement accelerations.
rotation acceleration
Only for the 2Dobj and 2Dblb profiles: array of the rotation accelerations.
frame id
Frame number transmitted by the tracker, increases at each new frame.
ip filter
Filter apply: receives only data's from the specified IP.
Use 0.0.0.0 for no filter.
Common Settings
info
show manual
Button. Opens the manual page of the selected object (or of its parent module for a control) in the web browser. If no page exists for this object, an error is traced in the trace panel.
For more details about information/help creation, see create-help-file.
description
Free multi-line text attached to the module, saved with the patch. It is only meant as an internal note for the patch designer: it is not displayed in the interface.
ID's
visible only in god mode, see setup-panel-tab-expert.
unique ID
Read-only, not saved. Current private numeric ID of the object, used internally to identify it (for example as the target of a bind ID).
preset ID
Read-only, not saved. Private ID used to store and recall the values of this control in presets.
recreate ID
Button. Generates a new unique ID, original ID and preset ID for the object. Use it if you experience difficulties in Polyphonic mode or if two objects share the same ID. Preset values and binds referring to the old IDs are lost.
Object Remote Address
absolute
Read-only, not saved. Absolute address of the object in the Usine objects tree, built from the workspace root. This is the address to use to reach the object from scripts, the objects panel or remote messages. Only shown for objects that are registered in the objects list. See objects-address.
local
Read-only, not saved. Address of the object relative to the current patch, valid inside that patch only. See objects-address.
user addr
Free user-defined address for the object (empty by default). When set, the object is also registered in the objects tree under this name, so it can be reached independently of its position in the workspace (the value is also reported in the mouse-over and mouse-down chunks). Changing it rebuilds the objects list. Only available on objects that support a user address. See objects-address.
See also
- Create OSC Translator File
- Setup onglet Réseau
- Tutoriel : OSC (Open-Sound-Control)
- Panel Embedded Web Page
- Network
- Network Modbus Client Read
- Network Send Bytes
- MDNS Service
- Network Get File
- Network Get Adapter Info
- Network FTP Put File
- Network MQTT Client
- Network Markdown to HTML
- MDNS Lister
- Network OSC Send
- Network OSC Receive
- Network KNX Connection
- Network PosiStageNet
- Network Web Browser
- Network Set IP Address
- Network Modbus Server
- Network TCP Client
- Network TUIO Receive
- Network KNX Group Receive
- Network OSC Lister
- Network Modbus Client Write
- Network TCP Server
- Network Web Socket
- Network KNX Group Send
- Network PJLink Projector
- Network RTTrPM
- Network Receive Bytes
- Network OSC Send String
version 7.0.250121
Edit All Pages